Device Specifications

bedside

DEVICE SPECIFICATIONS

EVOLVE ROOM CONTROLS

Mature, proven, and largely deployed, Evolve offers a variety of wireless control solutions bringing affordability and quality to hospitality. We’re building solutions that implement simply, run powerfully, and deliver a level of guest satisfaction that goes above and beyond. We are here to help you flexibly control, customize, and integrate every facet of your infrastructure with ease and at a price that fits within your budget.

Below is a list of our latest device specifications to download and review at your convenience.

  • KEYCARD READER

    The Evolve In-Room Card Reader is a wall mounted device powered by a 2-year lithium battery (CR-123) that conserves hotel room energy by disabling HVAC and lighting in unoccupied rooms.  Occupying only a single gang electrical box, the Evolve Card Reader is exceptionally easy to install and communicates seamlessly with other Z-Wave enabled devices

    Download / View PDF

  • SURFACE MOUNTED DOOR SENSOR

    The Evolve Wireless Sensor is a fully supervised magnetic contact transmitter, designed primarily for monitoring and detecting the opening and closure of doors and windows. Offering an additional back tamper switch, the wireless sensor will detect the removal of a device from its place to comply with the latest US and European requirements. Each wireless sensor is powered by a standard long-life lithium battery and includes low battery detection and warnings.

    Download / View PDF

  • RECESSED DOOR SENSOR

    The Evolve Recessed Door Sensor is battery-powered with an extremely small form factor and aesthetic design.  It’s simple – the door sensor will send radio signals to associated Evolve devices within its own Z-Wave network when the main unit separates from the smaller unit. A bi-directional mounting plate and push button allow for stress-free user installation and just like the Evolve Wireless Sensor, this device has tamper prevention capabilities and low-battery alerts.

    Download / View PDF

  • SCENE CONTROLLERS

    The Evolve Scene Controller is a programmable device that provides command and control of up to 5 (RF) network scenes and it’s a key component of the Evolve lighting control system. The Scene Controller can be a wall mounted device that easily fits onto a standard single gang electrical box with its efficient design that exposes an easy-to-use 5-button control keypad and lighted 64 x 128 graphical display. We also offer a tabletop version. The Evolve 5-button Scene Controller offers full protection from over voltage, over power, over temperature and short circuits and is certified with FCC, CE, C-TICK, and ROHS approvals.

    Download / View PDF

  • DOORBELL

    The Evolve Doorbell is a programmable, single button device that provides doorbell control and Do Not Disturb/Housekeeping indication – eliminating the traditional door hangers followed by the undesirable door knock. The Evolve Doorbell is a wall mounted device that easily fits onto a standard single gang electrical box with its efficient design that exposes an easy-to-use 1-button control keypad and lighted 64 x 128 graphical display. The device offers full protection from over voltage, over power, over temperature and short circuits and is certified with FCC, CE, C-TICK, and ROHS approvals.

    Download / View PDF

  • FIXTURE MODULE

    The Evolve Isolated Contact Fixture Module is a component of the Evolve lighting control system and can handle loads of up to 277v. The device can be easily mounted in a single or multi-gang electrical box in any existing environment and is compatible with Z-Wave security systems. Inclusion of this Module on a Z-Wave network allows remote ON/OFF control of the load connected and it’s fully scene capable.

    Download / View PDF

  • DUPLEX RECEPTACLE

    The Evolve Wall Mounted Outlet is a component of the Evolve lighting control system and is wired in place of a standard receptacle in any existing environment. Inclusion of this Outlet on a Z-Wave network allows remote ON/OFF control of loads connected to the controlled outlet (the other outlet remains powered at all times) and its fully scene capable.

    Download / View PDF

  • BINARY SWITCH

    The Evolve Wall Mounted Binary Switch is a component of the Evolve lighting control system. Inclusion of this Switch on a Z-Wave network allows remote ON/OFF control of loads connected and is compatible with Z-Wave security systems. It can be used on any type of 120 VAC fixture or bulb type, with a 15A limit.

    Download / View PDF

  • DIMMER

    The Evolve Wall Mounted Dimmer is a component of the Evolve lighting control system. It is fully scene capable and can handle loads of up to 500W for control of permanently installed lighting fixtures only (not for control of receptacles). The Evolve Wall Mounted Dimmer is easily wired in place of a standard wall dimmer in any existing environment. Inclusion of this Dimmer on a Z-Wave network allows remote ON/OFF control and dimming of loads connected.

    Download / View PDF

  • DRAPERY CONTROL UNIT

    The Evolve Drapery (RF) Control Unit is a programmable relay controller that provides remote control of Draperies, Sheers and Doorbells for hotel rooms/suites. This device is a component of the Evolve control system and consists of 7 relays for full drapery/sheer control (Open, Close, Stop). Moreover, Proportional Control conveniently allows for stopping drapes at any point while also providing power for a doorbell system.

    Download / View PDF

  • 3-WAY ACCESSORY SWITCH

    The Evolve 3-Way Wall Mounted Switch is a component of the Evolve lighting control system and is wired in place of a standard wall switch in any existing environment. Inclusion of this Switch on a Z-Wave network allows remote ON/OFF control and dimming of the loads connected, creating virtual 3-way switches. It’s fully compatible with Z-Wave security systems and does not directly control a load – rather it communicates with other load controlling devices or plug-in modules.

    Download / View PDF

  • BINARY PLUG-IN MODULE

    The Evolve Plug-in Appliance Module is a component of the Evolve lighting control system and is fully scene capable. The Appliance Module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be easily turned ON or OFF remotely via the Z-Wave network.

    Download / View PDF

  • DIMMING PLUG-IN MODULE

    The Evolve Plug-in Lamp Module is a component of the Evolve lighting control system. It is fully scene capable and can handle loads of up to 300W. The Lamp Module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or completely turned ON or OFF remotely via the Z-Wave network.

    Download / View PDF

  • MOTION SENSOR

    The Evolve Motion Sensor is designed to monitor guest rooms and suites where furniture layout may block a wall-mounted detector’s line of sight. The Sensor combines state-of-the-art optic design with advanced detection algorithms while covering up to 130 feet line of sight. Low battery signaling allows for efficient power management and prolonged battery life. In addition, each Sensor is constantly monitored for tampering and reports to the receiver. This device is typically used in conjunction with the DS-100 and complies with US and European standards.

    Download / View PDF

  • HIGH VOLTAGE THERMOSTAT

    The Evolve Wireless Digital Thermostat is designed to control the majority of HVAC systems with its all-in-one design including a 128 x 64 backlit graphical display and 6 button keypad with on screen labels. What makes this device different then the T-100-H is purely higher voltage. The Wireless Thermostat contains a robust interface and is designed for use with communicating systems where remote monitoring and/or remote control are desired. The Thermostat interface includes heating and cooling display, system mode, fan mode display and control and fan cycler amongst other features. The device can be wall mounted or mounted on a single-gang junction box.

    Download / View PDF

  • LOW VOLTAGE THERMOSTAT

    The Evolve Wireless Digital Thermostat is designed to control the majority of HVAC systems with its all-in-one design including a 128 x 64 backlit graphical display and 6 button keypad with on screen labels. The Wireless Thermostat contains a robust interface and is designed for use with communicating systems where remote monitoring and/or remote control are desired. The Thermostat interface includes heating and cooling display, system mode, fan mode display and control and fan cycler amongst other features. The device can be wall mounted on a single-gang junction box and requires both 24VAC (R) and 24VAC (C) wires from the HVAC System for power.

    Download / View PDF

  • BATTERY POWERED THERMOSTAT

    The Evolve Wireless Digital Thermostat/Temperature Sensor is designed to control the majority of HVAC systems when used in conjunction with the RPTAC-5. This device is battery operated and includes a 128 x 64 backlit graphical display and a 6 button keypad with on screen labels. The Battery Operated Thermostat contains a robust interface and is designed for use with communicating systems where remote monitoring and/or remote control are desired. The Thermostat interface includes heating and cooling display, system mode, fan mode display and control and fan cycler amongst other features. The device can be wall mounted or mounted on a single-gang junction box.

    Download / View PDF

  • HVAC CONTROLLER

    The Evolve HVAC Controller is an all-in-one design that controls the majority of HVAC systems. In conjunction with the TB-200, the HVAC Controller receives RF commands and controls the temperature in the room and enacts the system’s setback logic. The HVAC Controller uses standard thermostat connections (C, R, W1, W2, Y1, Y2, G) and Emergency Heat mode is selectable directly from the TB-200. Other Thermostat features include system mode (Off, Auto, Heat, Cool), fan mode display and control (Auto, High, Med, Low), setup of HVAC type, fan type, changeover type for HP systems, F/C mode and sensor calibration and a fan cycler feature. This device requires both 24VAC (R) and 24VAC (C) wires from the HVAC System for power.

    Download / View PDF